Emerson MS7609 owner manual Playing Compact Discs, Normal Playback

PLAYING COMPACT DISCS

NORMAL PLAYBACK

1.) Press the POWER button on the main unit or the remote control. The main display lighting comes 'On' and the STANDBY LED indicator goes 'Off'.

2.) Set the CD/RADIO selector to the CD position. Two bars "– –" will flash in the display for a few seconds while the player tries to read the disc and then "00" will appear, indicating that there is no disc in the player.

3.) Press the CD door OPEN button to open the CD door. Place a CD on the center spindle with the printed label side facing up. Gently press down on the disc near the center hole to make sure that the disc is properly 'seated' on the spindle.

C	U	M
S
I
D C

4.) Press down on the CD door until it closes completely and locks. The disc will begin to spin for a few seconds while the player reads the table of contents, then the disc will stop and the display will show the total number of tracks on the disc.

5.) Press the PLAY/PAUSE button to begin playback. The PLAY indicator appears in the display and playback begins on track 1.

PLAY

6.) Adjust the VOLUME and BASS BOOST controls as desired.

7.) When the last track has played the disc stops automatically. To stop playback at any time before the disc ends press the STOP button. The display again shows the total number of tracks on the disc.

13

MS7609_ib040303.p65 13

4/4/2003, 12:13