PROGRAMMED Playback
This feature allows you to program up to 20 tracks on a disc for playback in any desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing press the STOP 
button first before beginning the programming steps below:
1.) Press the PROGRAM button to enter the Program Mode. The PROGRAM indicator and Program Number ‘0’flash.
2.) Press the SKIP 
or 
buttons to select the first track number you wish to enter in the program memory.
Example: Track Number 8.
3.) When the desired track number appears on the display, press the PROGRAM button again to enter that track in memory.
The Program Number display returns to flashing “0”.
FM STEREO
PLAY/PAUSE
FM STEREO
PLAY/PAUSE
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
PROGRAM
REPEAT
PROGRAM
REPEAT
4.) Repeat Steps
Note: You may program the same track number to play multiple times in the program sequence if desired. When programmed track is full, “ – – ” flashes in the display.
5.) Press the PLAY/PAUSE 
button to begin Programmed Playback. The PROGRAM indicator flashes. Playback will begin with the first track you programmed and will continue until the last programmed track has played.
FM STEREO
PLAY/PAUSE
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
PROGRAM
REPEAT
16
MS7616R_061404.p65 | 16 |
14/6/2004, 10:38
