5.1 Analyzer Module Setup

5.1.8 Measurement Display Configuration

"Tags...":

Via the F5 key (Tags...) you can change to the second page of the menu "Measurement Display Configuration". There you can adjust the identification tag of the MLT analyzer or analyzer module and the tag of each range for the current channel. These range tags will appear at the top left of each menu page display. If you want to change the tags of the other channels, you have to press the F3 key.

Caution:

If you change the identification tag, you have to change the configuration of the programmable digital inputs and analog outputs. Because, the parameters of the module source will change ! So, the relations will disappear !

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MLT25/CH2/R2

 

 

 

 

 

95.00 ppm

 

 

 

 

 

 

 

 

 

-- Measurement Display Configuration (2/2) --

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Module identification tag:

 

 

MLT25/CH2

 

 

 

 

 

 

 

 

Tag for range 1:

 

 

 

 

MLT25/CH2/R1

 

 

 

 

 

 

 

 

Tag for range 2:

 

 

 

 

MLT25/CH2/R2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tag for range 3:

 

 

 

 

MLT25/CH2/R3

 

 

 

 

 

 

 

 

Tag for range 4:

 

 

 

 

MLT25/CH2/R4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measure

 

 

 

Channel

 

Back...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

F2

F3

 

F4

 

F5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tags set up:

¨Select the line you want with the − -key or ↓ -key.

¨Select the parameter with the 8 -key or the → -key.

¨Select the digit you want to change with the → -key or the ← -key and adjust the new value with the − -key or the ↓ -key;

Maximum of digits for each tag: 30

Options: alphabet (capital and small letters), umlauts, letters from different languages, 0, 1, 2,..., 9, +, -, *, /, =, ?, !, %, $ and many others.

¨Confirm the new value with the 8 -key or

cancel and go back to the last value with the F2 key.

Notes:

¨The changes of the range tags will be realized after you have changed the range for the first time !

¨You can set up the digits more fast by holding the − -key or the ↓ -key.

The scrolling will accelerate.

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

5 - 51