Structure of chapter six:
The structure of chapter six is analogous to the structur of chapter five:
At the begin of any chapter you will find the way to a certain submenu of the MLT software, starting from the line "System configuration and diagnostics..." in the "Main Menu". The way will be described with the software catchwords, that you have to enter one after another to reach the corresponding submenu. At the end of the catchword listing you will find the illustration of the LCD screen. After that you can read the
Example: You will bind micro processor controlled modules with analyzer modules.
Main Menu — System configuration
|
|
| ↓ |
|
|
| Network module binding | ||
|
|
| ↓ |
|
MLT25/CH2/R2 |
|
| 95.00 ppm | |
|
|
| ||
MLT25/CH1 |
|
|
|
|
MLT25/CH2 |
|
|
|
|
MLT25/CH3 |
|
|
|
|
MLT25/CH4 |
|
|
|
|
MLT25/CH5 |
|
|
|
|
Abort | Add! | Delete! | Bind! |
|
F1 | F2 | F3 | F4 | F5 |
In the menu "Module Binding" you can bind with the analyzer modules the following types of micro processor controlled I/O modules connected to the platform:
1)Analog Output with 3 Alarms I/O Module
2)Auto Calibration I/O Module
3)System Auto Calibration I/O Module
You can unbind all existing bindings between ...
Further explanations and setup instructions will follow !
6 - 2 | NGA 2000 |
90003482(2)