NGA-2000 System Calibration

Here we first choose the specific analyzer module and then we select at the parameter "Gastest of specific module" the required gas.

Each of the following types is possible:

∙SAMPLE-Gas (test mode deactivated)

∙Zero-Gas

∙All valves closed

∙SpanGas-1 (span gas for range 1)

∙SpanGas-2 (span gas for range 2)

∙SpanGas-3 (span gas for range 3)

∙SpanGas-4 (span gas for range 4)

With parameter "Timeout for Gastest" we can determine a time after which the activated gastest switches automatically back onto SAMPLE-Gas.

Is this parameter set to "0" the automatic back switching is not done automatically and user must break this mode with a "Cancel Calibration" Command.

Supplement - 16

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98