II) V24/RS232/485 Interface - Single Analyzers and Systems

SEGA – Control command "Spangas"

Starting this command the analyzers in a system or the single analyzer will switch on the calibration valve to spangas and switch on the required pumps. This function will only check the end point. It will not correct the calibration. If continuous line recorders will be available, the paper transport will also be switched on.

Control command

SEGA K0

Function associated to the whole system unit

Code

SEGA K1 Kn

Function associated to channel n

Function associated to channel 1

Code

Response

SEGA 0

Error status

Code

90003752(1) [AK-Commands] 10/98

AK

2 - 15