II) V24/RS232/485 Interface - Single Analyzers and Systems

SGTS – Control command "Device test"

Starting this command the analyzers in a system or the single analyzer will switch off the calibration gas and the samplegas. That means, all gas tubes to the analyzer device will be closed and the pumps will be switched off. Then, the device can be checked via a gas input that is located directly in front of the device.

Control command

SGTS K0

Function associated to the whole system unit

Code

SGTS K1 Kn

Function associated to channel n

Function associated to channel 1

Code

Response

SGTS 0

Error status

Code

90003752(1) [AK-Commands] 10/98

AK

2 - 19