II) V24/RS232/485 Interface - Single Analyzers and Systems
AKAK – Read command "Calibration gas concentration"
To this read command the analyzers in a system or the single analyzer will send to the TBCC the following data for the called channel (device) and range:
∗The calibration gas concentration in ppm.
Read command
AKAK Kn [Mx]
Range number (optional); x = 1, 2, 3, 4 Output of all ranges, if no range is named.
Read of channel n
Code
Response
AKAK 0 M1 XXX M2 XXX ... Mn ZZZ
Concentration of calibration gas
Range n
Concentration of calibration gas
Range 2
Concentration of calibration gas
Range 1
Error status
Code
The values will get the same format for the read of single ranges.
90003752(1) | AK | 2 - 53 |