PLAYING COMPACT DISCS
Raising And Lowering The CD Door
•Manually raise the door until it is fully open. The door support bracket will hold the door in the open position.
•To close the door pull the door support bracket toward you to release it and lower the door.
1.) Turn the
2.) Set the Function selector (AM/FM/CD) to the CD position. The CD track number display comes ‘on’.
3.) Open the CD door. Lift the CD clamper arm, remove the transit card which was used to secure the laser during shipment and dispose of this card.
4.) Place your disc on the CD spindle with the printed label side facing up and lower the CD clamper arm. The disc will spin for a few seconds while the player reads the disc, then the disc stops and the display shows the total number of tracks on the disc.
5.) Press the PLAY/PAUSE button to begin playback on track number one. The Play indicator comes “on”.
Note: You may leave the CD door open during playback if you wish, but we recommend closing the door again for better sound and also to prevent excess dust from accumulating on the CD spindle.
6.) Adjust the
7.) Playback will continue until the end of the disc. When the disc ends the display again shows the total number of tracks on the disc. You may also stop playback at any time by pressing the STOP button.
9
NR51_011604.p65 | 9 |
16/1/2004, 10:46
