Emerson NR52 owner manual Playing Compact Discs, Pause Control

PLAYING COMPACT DISCS

1.) Turn the ON/OFF-VOLUMEcontrol clockwise until a ‘click’is heard, and set the volume to a low level.

2.) Set the Function selector (AM/FM/CD) to the CD position. The CD track number display comes ‘on’.

3.) Press the CD DOOR OPEN/CLOSE button to open the CD door. Lift the CD clamper arm, remove the transit card which was used to secure the laser during shipment and dispose of this card

4.) Place your disc on the CD spindle with the printed label side facing up and lower the CD clamper arm. The disc will spin for a few seconds while the player reads the disc, then the disc stops and the display shows the total number of tracks on the disc.

5.) Press the CD PLAY/PAUSE button to begin playback on track number one. The Play indicator comes “on”

PLAY/PAUSE

Note: You may leave the CD door open during playback if you wish, but we recommend closing the door again for better sound and also to prevent excess dust from accumulating on the CD spindle.

6.) Adjust the ON/OFF-VOLUMEand TONE controls to the desired level.

7.) Playback will continue until the end of the disc. When the disc ends the display again shows the total number of tracks on the disc. You may also stop playback at any time by pressing the CD STOP button.

Pause Control

To pause momentarily during playback press the CD PLAY/PAUSE			button
again. Playback stops but the disc continues to spin and the
Play indicator flashes. Press the CD PLAY/PAUSE	button	PLAY/PAUSE

once more to cancel Pause and resume playback. The Track Number display stops flashing.

9

NR52_010704.p65 9

7/1/2004, 11:53