USING STEREO HEADPHONES (NOT INCLUDED)

Connect a set of stereo headphones with a 3.5mm mini-plug to the PHONE jack on the front panel. Before putting on the headphones always set the ON/OFF- VOLUME control to a low level. Then put the headphones on and gradually increase the Volume to a comfortable listening level. The built-in speaker automatically shuts off when headphones are connected to the PHONE jack.

Note: Sound from PHONE output jack is mono.

LINE OUT Jacks

This system includes a set of LINE OUT jacks which allow you to record from the radio or CD player of this system to an external recording device such as a cassette recorder, Mini-Disc, etc.

Connect the Line LINE OUT jacks of this system to the Record Input jacks of your external recording device. Connection cables are not included. Refer to the instructions supplied with your external recording device for proper connection and operation. Operate the CD player or radio of this system as described in the instructions above. The CD or radio programming of this system will be recorded directly onto your external recording device.

Note: Line Out from CD will be Stereo, while Radio is Mono.

13

NR52_010704.p65

13

7/1/2004, 11:53

Page 14
Image 14
Emerson NR52 owner manual Using Stereo Headphones not Included, Line OUT Jacks