PLAYING COMPACT DISCS

NOTE: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player.

NORMAL PLAYBACK

1.) Move the FUNCTION selector to the CD position. The POWER Indicator comes “On”

2.) Open the CD door by lifting the notch at right side of CD door. If you have not already removed the white transit card from the CD player, please remove it now.

3.) Place your CD on the center spindle with the printed label side facing up. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc. If the disc is damaged or up side down, display shows “”.

4.) Press the CD PLAY/PAUSE button to begin playback on Track 1. The play “Dot” Indicator appears in the display.

To skip to higher or lower numbered tracks during playback press the or

button repeatedly until the desired track number appears in the display. Playback will begin on the selected track.

To search rapidly forward or backward during playback to locate a specific

portion of a track, depress and hold the or button. The player will search rapidly forward or backward as long as the buttons are depressed. Normal speed playback will resume when the buttons are released.

To Pause momentarily during playback press the PLAY/PAUSE button again. The sound stops and the play “Dot” Indicator

flashes, however the disc continues to spin. To cancel Pause and resume normal playback press the PLAY/

PAUSE button once more. Normal playback resumes and the play “Dot” Indicator stops flashing.

5.) Adjust the VOLUME and BASS BOOST controls as desired.

10

PD1710_010504.p65

10

5/1/2004, 15:55

Page 11
Image 11
Emerson PD1710 owner manual Playing Compact Discs, Normal Playback