PROGRAMMED PLAYBACK

Programmed playback enables tracks on a disc to be played in any desired order. Up to 20 tracks can be programmed.

NOTE : Programming can only be done when the player is in Stop mode.

1.) Press the PROGRAM button. “PROGRAM” indicator flashes in the display.

P R O G R A M

PROGRAM

2.) Press the FWD or REV button to select the desired track number. Example: Track 7.

P R O G R A M

REV. SKIP FWD.

SEARCH

3.) Press PROGRAM button again to memorize the track.

4.) Repeat steps 2 and 3 until all desired tracks are programmed.

5.) Press the PLAY/PAUSE button to start playback. “PROGRAM " indicator is flashing in the CD display.

PLAY

P R O G R A M

6.) Press STOP button to stop programmed playback. The CD playback stops but the program remains in the memory.

7.) Press PROGRAM and PLAY/PAUSE buttons to resume programmed playback.

8.) To clear the program memory, open the CD door, change to Radio function or switch the power ‘OFF’.

12

PD5198_032105.p65

12

21/3/2005, 16:00

Page 13
Image 13
Emerson PD5198 owner manual Programmed Playback