PD5500 O/M.QXD 7/9/01 4:35 PM Page 6
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1
2 |
1 |
2 |
3 |
Press the POWER button ❶ to |
| Press the FUNCTION button to |
turn the unit on, the display will |
| select RADIO; TUNER will appear |
light. Set the VOLUME control ❷ |
| in the display. |
to a low setting. |
|
|
|
|
|
Press the BAND button to the desired band - FM or AM.
NOTE: If you select the FM band, be sure to raise the FM rod antenna and extend it to its full length.
4 |
Press and release the Tuning Up/Clock Adj.(+) FWD. (
) or 
) button to select a station.
Press and hold the Tuning Up/Clock Adj.(+) FWD. (
) or 
) button for approximately 1 second and then release; the tuner will automatically scan up to the next strong station available in your area.
5
1 |
2 |
Adjust the VOLUME ❶ and BBS
❷as desired.
6
2 | 1 |
|
If the BAND button ❶ is set to FM and you have tuned to an FM Stereo station, “STEREO” will appear in the display.
When you have finished listening, press the POWER button ❷ to turn the unit off.
HINTS FOR BETTER RECEPTION
FM - Make sure that the telescopic FM Rod Antenna is raised and extended to its full length. You may have to vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.
BBS (BASS BOOST):
Press this button to the ON (in) position to enhance the overall Bass sound. Press to the OFF (out) position for normal listening.
6
