PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP 
button to stop playback before you begin the programming steps below.
1.) Press the FUNCTION button to select CD, insert your disc in the player, close the door, and wait until the total track number appears in the display.
2.) Press the PROGRAM/TIME ADJ button once. The PROG Indicator flashes and program memory
PROG 
3.) Use the 
/ 
buttons to select the first track to be programmed.
(Example: Track 08).
PROG 
4.) When track number “08” appears in the display, press the PROGRAM/TIME ADJ button once again to enter the track
“08”in program memory number “01”. The
track number returns to “00” and the | PROG |
| |
program memory advances to |
|
indicating that you may now select a track |
|
to be entered in program memory number “02”. |
|
5.) Use the 
or 
buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM/TIME ADJ button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
7.) To begin programmed playback press the
PLAY/PAUSE | button. The display will | PROG |
|
show the first programmed track and 
playback will begin on that track. The PROG 
Indicator stops flashing and remains in the display.
21
PD5802_ib031803.p65 | 21 |
18/3/2003, 11:06
