PREPARATION FOR USE
UNPACKING AND SET UP
•Carefully remove the unit and the accessories from the carton and remove all the packing material from the unit. IMPORTANT: The remote control and the AC power cord are packed in recesses in the top of the styrofoam. Make sure that you do not accidentally discard these accessories with the packing materials.
•Carefully remove any small strips of tape which may have been used to keep the CD and Cassette doors closed during shipment.
•Open the CD compartment by pressing the OPEN/CLOSE position on top right of CD door and lifting upward. Inside the CD compartment you will see a white transit card which is used to prevent the laser
•Please save the carton and packing materials in the event that your unit ever needs to be returned for service. The original carton and packing materials are the only way to protect the unit from damage during shipment.
POWER SOURCES
This unit is designed to operate on 8 pcs “D” batteries, not included, or on normal 120V 60Hz AC house current. Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty.
AC Operation
Connect the small end of the AC Power Cord to the AC socket on the back cabinet, then insert the plug in any convenient household 120V 60Hz AC outlet.
4
PD5802_ib031803.p65 | 4 |
18/3/2003, 11:06
