PLAYING CASSETTE TAPES
1.) Open the cassette door by pressing the STOP 
/ EJECT 
key.
2.) Place a
Close cassette door.
3.) Move the FUNCTION selector to the TAPE position.
4.) Press the cassette PLAY 
key to begin playback.
5.) Set the VOLUME control as desired.
6.) To advance the tape rapidly press the F. FWD 
key. To stop the tape before
it ends press the STOP 
/EJECT 
key.
7.) To rewind the tape rapidly press the REW 
key. To stop the tape before it
ends press the STOP 
/EJECT 
key.
7.) When the tape ends the Automatic Stop System releases the PLAY 
key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired.
8.) When you are finished listening stop the tape, open the door, remove the tape and close the door. If you are playing a tape and then switch to the RADIO or
CD function be sure to press the STOP 
/EJECT 
key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism.
IMPORTANT:
Always press the STOP 
/EJECT 
key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function
in the F. FWD 
and REW 
modes. When the tape ends in the F. FWD 
and
REW 
modes the motor continues to run. You must press the STOP 
/EJECT
key to shut off the motor before opening the door to remove your tape.
13
PD6537_ib011303.p65 | 13 |
13/1/2003, 14:48
