MAKING A TAPE RECORDING
This model allows you to make tape recordings directly from the CD player, or the radio.
•Refer to “PLAYING COMPACT DISCS” if necessary to operate the CD player.
•Refer to “LISTENING TO THE RADIO” if necessary to tune in the station you wish to record from radio.
1.) Press the STOP 
/EJECT 
key to open the cassette door.
2.) Insert a good quality blank cassette tape into the slots on the cassette door with the open end facing up and the full reel on the right. Use normal tape only. Do not use tape identified as “CrO2” (Chrome) or “Metal” tape formulations. For best results use tapes of 60 minutes
3.) Close the cassette door.
4.) When you are ready to start recording press the RECORD 
key. The PLAY 
key will also engage. The CD you are playing, or radio program you selected
will be recorded directly on to the tape.
5.) Press the PAUSE 
key during recording to stop the tape temporarily and avoid recording unwanted material such as radio commercials.
6.) When you have finished recording press the STOP 
/EJECT 
key to stop and remove the tape.
BEAT CUT SWITCH (On Left Side Cabinet)
Occasionally when recording from the AM radio a repetitive whistle or ‘beat’sound may be heard. If this occurs slide the BEAT CUT switch to its other position to eliminate the unwanted sound.
Automatic Recording Volume Level Control
This unit has an Automatic Level Control (ALC) circuit which controls the recording volume level and prevents overloaded and distorted recordings. The VOLUME control has no effect on recording volume level. You may change the VOLUME control setting during the recording or even reduce the volume level to “Minimum”. This will not effect the level of the recording.
14
PD6537_ib011303.p65 | 14 |
13/1/2003, 14:48
