SETTING THE CLOCK
Clock can be set while clock time is displayed, at Power ‘Off’mode only, and follow the procedures below:
1.) Press the MEMORY button for more than one second. The Hour will start flashing.
PROGRAM
MEMORY | AM |
2.) Adjust the hour by pressing the 
/ 
buttons. Set the correct hour for AM or PM.
3.) Press MEMORY button to confirm. Minutes will start flashing.
PM
4.) Adjust the minutes by pressing the 
/ 
buttons.
5.) Press MEMORY button to store the time.
PM
NOTE:
•If button is not pressed within 5 seconds, the clock display stops flashing.
•If the unit is disconnected from the AC power and no batteries installed, you will need to reset the clock.
12
PD6900_ib_053102.p65 | 12 |
31/5/2002, 17:24
