OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) Move the FUNCTION selector to the RADIO position.
2.) Move the BAND selector to the desired band, FM ST, FM or AM.
3.) Tune to your desired station with the TUNING control. If you have set the BAND selector to FM ST and you tune to a FM Stereo station the FM ST. LED Indicator will light.
4.) Adjust the VOLUME + / – controls to the desired level.
5.) When you are finished listening move the FUNCTION selector back to the OFF/TAPE position to shut the power ‘Off’and extend the battery life.
Antenna Information
AM
The AM antenna is inside the cabinet. IF AM reception is unsatisfactory try rotating the entire unit until you find the position that provides the best reception.
FM
Vary the direction of the FM antenna to find the position that provides the best reception.
NOTE: If you are listening to a weak FM Stereo station you can usually improve the reception by moving the BAND selector from the FM ST position to the FM position, however the sound will now be mono.
9
PD6922_B111003.p65 | 9 |
10/11/2003, 11:12
