PLAYING CASSETTE TAPES
1.) Open the cassette door by pressing the 
key.
2.) Place a
3.) Move the FUNCTION selector to the OFF/TAPE position.
4.) Press the cassette 
key to begin playback.
5.) Adjust the VOLUME + / – controls as desired.
6.) To advance the tape rapidly press the 
key. To stop the tape before it ends
press the 
key.
7.) To rewind the tape rapidly press the 
key. To stop the tape before it ends
press the 
key.
8.) When the tape ends the Automatic Stop System releases the 
key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired.
9.) When you are finished listening press the 
key to stop the tape. Open the door, remove the tape and close the door. If you are playing a tape and then switch to the RADIO or CD function be sure to disengage the tape mechanism. This prevents excess wear and tear on the mechanism.
IMPORTANT:
Always press the 
key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function in the
Fast Forward and Rewind modes. When the tape ends in the 
and 
modes
the motor continues to run. You must press the 
key to shut off the motor before opening the door to remove your tape.
15
PD6922_B111003.p65 | 15 |
10/11/2003, 11:12
