MODEL 404 | WIRING |
CLEANING THE SENSOR
The
Use a warm detergent solution and a soft brush or pipe cleaner to remove oil and scale. Isopropyl alcohol (rubbing alco- hol) can also be used to remove oily films. Avoid using strong mineral acids to clean conductivity sensors.
CALIBRATION
ENDURANCE conductivity sensors are calibrated at the factory and do not need calibration when first placed in service. Simply enter the cell constant printed on the label into the analyzer.
After a period of service, the sensor may require calibration. Because Model 404 sensors have a
For more information about calibrating contacting conductivity sensors, refer to application sheet ADS
4