PREPARATION FOR USE
UNPACKING AND SET UP
•Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit.
•Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
•Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
•Unwind the AC power cord and extend it to its full length.
AC OPERATION
The AC power cord is located inside the battery compartment. It is permanently attached to the radio to prevent loss.
•Open the battery compartment by pressing on the “ OPEN ” marks on the cover and sliding it downward in the direction of the arrows.
O P E N | O P E N |
4
4 |
27/6/2005, 11:55
