Emerson warranty SL-2G Thermostat Controller Installation Instructions, General

Models: SL-2G

1 4
Download 4 pages 30.1 Kb
Page 1
Image 1
SL-2GThermostat Controller Installation Instructions

SL-2GThermostat Controller Installation Instructions

General

This product has been designed and manufactured for the sole intended use of controlling EasyHeat ILH (interior pipe heating) heating cable sets. Improper installation, use, operation and or maintenance of these cables can cause fire and/or result in electrical shock.

General Warning

1.If after carefully reading these instructions you still have questions regarding installation or operation of this product, call the numbers listed below for assistance.

2.The SL-2G contains an integral ground fault circuit interrupter

(GFCI). If the GFCI trips and cannot be reset, a fault exists in the ILH heating cable set. Do not attempt to bypass the GFCI. Bypassing the GFCI will result in the risk of fire or electrical shock.

3.The SL-2G contains an integral temperature sensing bulb.

The sensing wire must not be kinked or compressed during installation. When used with the ILH product, the sensing wire must be secured to piping with tape, and not with cable ties or pipe clamps, as these will damage the sensing wire. Sensing wire damage will result in improper control of the heating cables and may result in frozen pipes and the risk of fire or electrical shock.

4.All ILH cable sets must be installed in compliance with the latest editions of the: National Electrical Code; Canadian Electrical Code; State or Provincial Codes;

and Local Codes.

5.These instructions must be saved and made available to owners or users of this product and transferred to future owners. If additional copies of these instructions are required, contact at Easy Heat at the address noted below.

6.Do not connect more than one cable set to the SL-2G controller, the maximum cable size that can be connected to the SL2G is 1440Watts (12 Amps).

 

Sensing Wire

Sensing Bulb

Specifications

 

Voltage

120 VAC

Current

12 Amps Maximum

Temperature Range

2° C to 25°C ± 2°C

CSA Certified

LIMITED WARRANTY AND LIABILITY

Easy Heat warrants that if there are any defects in material or workmanship in this product during the first twelve (12) months after the date of its purchase, we will replace the product with an equivalent model, not including any labor or other installation costs.

Our obligation to replace the product as described above is conditioned upon (a) the installation of the product conforms to the specifications set forth in our installation instructions and (b) the product not having been damaged by unrelated mechanical or electrical activities.

Product replacement as described above shall be your sole and exclusive remedy for a breach of this warranty. This limited warranty does not cover any service costs relating to repair or replacement.

Any implied warranty of merchantability or fitness for particular purpose that may arise in connection with the sale of this product shall be limited in duration to twelve (12) months from the date of purchase. We disclaim all other implied warranties, unless we are prohibited by law from doing so, in which case all such implied warranties shall expire at the earliest time permitted by applicable law. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

To obtain a replacement under this warranty any inoperative product or component must be returned, with proof of purchase, to Easy Heat at the addresses noted herein. Buyer is responsible for all costs incurred in removal and re-installation of product and

 

We shall not be liable for any incidental, special or consequential damages as a result of

must pre-pay shipment to factory or point of purchase.

 

any breach of this warranty or otherwise, whether or not caused by negligence. Some

 

 

 

 

 

states do not allow the exclusion or limitation of incidental or consequential damages,

In Canada

In USA

 

so the above limitation or exclusion may not apply to you.

 

 

 

Heating Cable Warranty Dept.

Heating Cable Warranty Dept.

 

 

 

 

 

The warranty above is exclusive and makes no other warranties with respect to description

99 Union Street

2 Connecticut South Drive

 

Elmira ON N3B 3L7

East Granby CT 06026

 

or quality of the product. No affirmation of fact or promise made by us, by words or

 

 

 

 

 

 

action, shall constitute a warranty. If any model or sample was shown to you, the model or

 

 

 

 

 

sample was used merely to illustrate the general type and quality of the goods and not to

 

 

 

 

 

represent that the goods would necessarily be of that type or nature. No agent, employee

 

 

 

 

 

or representative of ours has authority to bind us to any affirmation, representation or

 

 

 

 

 

warranty concerning the goods sold unless such affirmation, representation or warranty

 

 

 

 

 

is specifically incorporated by written agreement.

 

 

 

 

 

US

T. (800) 537-4732 / F. (888) 324-2440

 

 

 

 

 

CAN

T. (800) 794-3766 / F. (800) 361-4574

 

 

 

 

 

 

 

 

 

 

 

©2009 EASYHEAT

www.easyheat.com

 

 

14066-001 Rev. 5

Page 1
Image 1
Emerson warranty SL-2G Thermostat Controller Installation Instructions, General, Specifications