QUICK START GUIDE
FOR MODEL SOLU COMP Xmt-P-FF/FI TRANSMITTER
1.Refer to page 5 for installation instructions.
2.Wire pH or ORP sensor to the transmitter. See Figure 6 for panel mount; Figure 7 for pipe or surface mount. Refer to the sensor instruction sheet for details.
3.Once connections are secure and verified, apply power to the transmitter.
4.When the transmitter is powered up for the first time, Quick Start screens appear. Using Quick Start is easy.
a.A blinking field shows the position of the cursor.
b.Use the ⇐ or ⇒ key to move the cursor left or right. Use the ⇑ or ⇓ key to move the cursor up or down or to increase or decrease the value of a digit. Use the ⇑ or ⇓ key to move the decimal point.
c.Press ENTER to store a setting. Press EXIT to leave without storing changes. Pressing EXIT also returns the display to the previous screen.
Measure? | pH |
Redox | ORP |
|
|
|
|
Use Preamp | in? |
Xmtr | Sensor/JBox |
|
|
5.Choose measurement: pH, ORP, or Redox.
6.Choose preamplifier location. Select Xmtr to use the integral preamplifier in the transmitter; select Sensor/JBox if your sensor has an integral preamplifier or if you are using a remote preamplifier located in a junction box.
Temperature in?
CF
7.Choose temperature units: °C or °F.
8.To change output settings, to scale the
9.To return the transmitter to default settings, choose ResetAnalyzer in the Program menu.
4