Manual Supplement
00809-0300-4727, Rev AA
June 2005
Rosemount 8700 Series
4
STEP 2: PREPARING THE FLOWTUBE
1. Remove the existing o-ring and discard appropriately.
2. Replace the o-ring with the new one supplied with the Remote Junction Box in the
conversion kit.
3. Place the remote mount junction box on the flowtube mounting plate.
4. Mount the junction box with the 4 bolts provided in the kit. See Figure 2.
Figure 2. Mount the junction box
Replacement O-Ring
8711/8711_01aa.eps
Mounting Plate
Junction Box
Bolts
0300-4727 Supplement.fm Page 4 Tuesday, June 7, 2005 9:27 AM