Manuals / EMI / Household Appliance / Air Conditioner

EMI DWPH365 (WHP36-SHC36) Part TWO Warranty, Part Three Performance, Part Four Indoor Unit

Models: DWPH365 (WHP36-SHC36)

1 3
Download 3 pages 19.94 Kb
Page 2
Image 2

EMI ENGINEERING SUBMITTAL DWPH365 (WHP36-SHC36)

PART ONE “GENERAL”

The Heat Pump air conditioning system shall be an EMI AmericaSeries split system. The system shall consist of a High Wall mounted packaged evaporator section Model WHP36 and matching AmericaSeries outdoor unit Model SHC36. The units shall be made within North America. The units shall be listed by Intertek Testing Service (ITS) and bear the ETL label. All wiring shall be in accordance with the National Electrical Code (N.E.C.). The units shall be rated in accordance with ARI Standard 210/240 and bear the ARI label. The units shall be manufactured in a facility certifi ed to ISO 9001, which is an international standard used to provide guidance in the development and implementation of an effective Quality Management System. The condensing unit shall contain an R-22 refrigerant charge for the evaporator section and condenser section. System SEER shall meet or exceed 1992 Federal Standards.

PART TWO “WARRANTY”

The units shall have a manufacturer’s warranty for a period of one (1) year from date of installation. The compressor shall have a warranty of fi ve (5) years from date of installation. If, during this period, any part should fail to function properly due to defects in workmanship or material, it shall be replaced or repaired at the discretion of Enviromaster International LLC. This warranty does not include labor. Manufacturer shall have fi fteen years experience in the U.S. market.

PART THREE “PERFORMANCE”

Each indoor unit shall provide a total minimum cooling capacity of 33,000 Btuh with an SEER of 10.0 and EER of

10.0at ARI standard conditions. The system net minimum total cooling capacity shall be 33,000 Btuh and the net minimum sensible cooling capacity shall be 20,600 Btuh with a circulating air rate of 750 CFM at 80o F (DB)/67o F (WB) entering the indoor coil and 95o F(DB) air entering the outdoor coil. The total power consumption of the combined system shall not exceed 3,300 Watts at these conditions.

HEATING

The system shall provide a heating capacity of 31,000 Btuh with a HSPF of 6.8 at ARI standard conditions.

The heating capacity at 70º F indoor and17º F outdoor shall be 18,200 Btuh.

PART FOUR “INDOOR UNIT”

The indoor unit shall be factory assembled, wired and contain a low voltage transformer. The cabinet shall have a white paint fi nish. The evaporator fan shall be an assembly with line fl ow tangential fan direct driven by a single motor. The fan shall be statically and dynamically balanced and run on permanently lubricated bearings. An adjustable vane shall be provided with ability to change the airfl ow vertically. Return air shall be fi ltered by means of an easily removable electrostatic washable fi lter. The evaporator coil shall be of nonferrous construction with louvered fi ns bonded to rifl ed copper tubing. The tubing shall have inner grooves for high effi ciency heat exchange. All tube joints shall be brazed with phoscopper or silver alloy. The coil shall be pressure tested at the factory. A condensate pan and drain shall be provided under the coil. System refrigerant fl ow shall be controlled by means of an orifi ce piston in the indoor unit. The unit electrical power shall be 208/230 Volts, 1 phase, 60 Hertz. The system shall be capable of satisfactory operation within voltage limits of 208/230 +/- 10% Volts.

PART FIVE- “CONTROL SYSTEM”

The control system shall consist of unit-mounted infrared compatible controls. Interconnect low-voltage Wiring shall run from indoor unit to outdoor unit direct. NO SPLICES. When running low voltage wiring a double insulated, 5-wire 18 gage cable is mandatory or use shielded 5-wire cable. The microprocessor shall be factory wired and located within the indoor unit. It shall have the capability of sensing return air temperature and indoor coil temperature; large ¾” LCD backlit display; operational range adjustable between 55º F and 95º F in one-degree increments; anti-short cycle compressor protection; minimum compressor run time; fan purge, fan remains on for 60 seconds after heat/cool call is dropped for improved effi ciency; freeze protection to prevent evaporator freeze ups; annunciation provides an audio feedback when the control settings are changed; universal control board allows the unit to operate with either a straight cool or heat pump condenser; two stage heating when optional electric heat and heat pump condenser

http://www.enviromaster.com

emi@enviromaster.com

Page 1 Page 3
Page 2
Image 2
EMI DWPH365 (WHP36-SHC36) Part TWO Warranty, Part Three Performance, Part Four Indoor Unit, Part FIVE- Control System
Page 1 Page 3

DWPH365 (WHP36-SHC36) specifications

The EMI DWPH365, also known as WHP36-SHC36, is a powerful and versatile wireless high-performance speaker designed for both professional and home entertainment use. This innovative speaker system combines cutting-edge technology with a sleek design, making it an ideal addition to any audio setup.

One of the standout features of the DWPH365 is its impressive sound quality. Equipped with advanced audio processing technology, the speaker delivers crystal-clear sound across a wide frequency range. This ensures that every note and detail is captured, whether you are listening to music, watching movies, or playing video games. The deep bass response adds an immersive dimension to the audio experience, making it perfect for any audiophile.

The DWPH365 utilizes wireless connectivity, enabling seamless pairing with various devices. This speaker supports Bluetooth technology, allowing users to connect their smartphones, tablets, and computers effortlessly. Additionally, it incorporates Wi-Fi connectivity, offering the option for high-resolution streaming from popular platforms. The dual connectivity options ensure flexibility in how users choose to access their music library or favorite podcasts.

Another important characteristic of the DWPH365 is the integration of smart features. The speaker is compatible with voice assistants, making it simple to control playback with just voice commands. Users can easily adjust volume levels, skip tracks, or even request information without needing to reach for their devices. This hands-free convenience significantly enhances the user experience.

Portability is another key aspect of the DWPH365 design. Lightweight yet durable, it can be easily transported from room to room or taken outside for outdoor gatherings. The robust battery life ensures extended playback times, making it suitable for parties, picnics, or simply enjoying a quiet evening at home.

Finally, the aesthetic appeal of the DWPH365 is worth mentioning. With its modern and sleek exterior, it complements any decor style, whether in a contemporary living room or a rustic outdoor setting. The user-friendly interface and intuitive controls further enhance the overall usability of the device.

In summary, the EMI DWPH365 (WHP36-SHC36) is a feature-rich, high-performance wireless speaker that caters to a variety of audio needs. With excellent sound quality, versatile connectivity options, smart features, portability, and attractive design, it stands out as a top choice for both casual listeners and audiophiles alike.