EMI ENGINEERING SUBMITTAL DWPH365 (WHP36-SHC36)

are selected; fan operation of auto (cycling), high and low (constant), auto fan operation automatically selects fan speed according to heating or cooling demand; dry mode operates cooling and electric heat simultaneously to remove humidity, optional electric heat must be selected; test operation allows ease of testing after installation (all timers are eliminated); non-volatile back-up memory, control settings are maintained for an indefi nite period during a power outage, when power is restored the equipment will resume operation after a three-minute compressor time delay; optional hand held infra-red controller. The control voltage between the indoor unit and the outdoor unit shall be 24 Volts A.C. The 24 Volts shall be generated from the indoor unit’s 24 Volt 40VA transformer.

PART SIX “OUTDOOR UNIT”

The outdoor unit shall be completely factory assembled, piped and wired. The cabinet shall be fabricated of G60 galvannealed steel, fi nished in “off-white” with corrosion inhibiting polyester powder-coated paint. The unit shall be furnished with one (1) direct drive, propeller type fan arranged for horizontal discharge. The motor shall have inherent protection, be of the permanently lubricated type, and resiliently mounted for quiet operation. The fan shall be provided with a guard to prevent contact with moving parts. The compressor shall be of the high-performance reciprocating type with an internal thermal overload. The compressor shall be mounted so as to avoid the transmission of vibration. The refrigeration system shall be equipped with high pressure switch and have the capability to operate with a maximum height difference of 35 feet and overall refrigerant tubing length of 100 feet between indoor and outdoor sections without the need for line size changes or additional oil. The condenser coil shall be of nonferrous construction with louvered fi ns bonded to rifl ed copper tubing. The unit shall be controlled by the microprocessor located in the indoor matching unit. The unit electrical power shall be 208/230 Volts, 1 phase, 60 Hertz. The system shall be capable of satisfactory operation within voltage limits of 208/230 Volts +/- 10%. Heating expansion is controlled by a TXV in the outdoor unit.

PART SEVEN “OPTIONAL EQUIPMENT”

Hand Held Infrared Remote Controller – used to command the unit-mounted controls.

24V Wall Thermostat Control anti-short cycle compressor protection; fan purge, fan remains on for 60 seconds after heat/cool call is dropped for improved effi ciency; integral heating relay ensures that the fan operates whenever electric heat is energized; two stage heating capable when matched up with an EMI heat pump and an appropriate two stage thermostat.

5KW Electric Heat – shall be factory installed; automatic reset high temperature cutout and redundant high temperature fuse link.

Internal Condensate Pump – shall be fi eld installed or factory installed and shall have 4 ft of head.

Low Ambient Control – shall consist of a fan cycle switch and a lock-out relay, fi eld installed.

Hard Start – shall be fi eld installed.

Sea Coast Style Coated Coils – shall be factory installed; coating shall protect against corrosion due to acids, solvents and salt.

5780 Success Drive, Rome, NY 13440

Phone: 1-800-228-9364

FAX: 1-800-232-9364

Email: emi@enviromaster.com

Enviromaster International LLC

Rome, New York, USA

Page 3
Image 3
EMI DWPH365 (WHP36-SHC36) warranty Part SIX Outdoor Unit, Part Seven Optional Equipment

DWPH365 (WHP36-SHC36) specifications

The EMI DWPH365, also known as WHP36-SHC36, is a powerful and versatile wireless high-performance speaker designed for both professional and home entertainment use. This innovative speaker system combines cutting-edge technology with a sleek design, making it an ideal addition to any audio setup.

One of the standout features of the DWPH365 is its impressive sound quality. Equipped with advanced audio processing technology, the speaker delivers crystal-clear sound across a wide frequency range. This ensures that every note and detail is captured, whether you are listening to music, watching movies, or playing video games. The deep bass response adds an immersive dimension to the audio experience, making it perfect for any audiophile.

The DWPH365 utilizes wireless connectivity, enabling seamless pairing with various devices. This speaker supports Bluetooth technology, allowing users to connect their smartphones, tablets, and computers effortlessly. Additionally, it incorporates Wi-Fi connectivity, offering the option for high-resolution streaming from popular platforms. The dual connectivity options ensure flexibility in how users choose to access their music library or favorite podcasts.

Another important characteristic of the DWPH365 is the integration of smart features. The speaker is compatible with voice assistants, making it simple to control playback with just voice commands. Users can easily adjust volume levels, skip tracks, or even request information without needing to reach for their devices. This hands-free convenience significantly enhances the user experience.

Portability is another key aspect of the DWPH365 design. Lightweight yet durable, it can be easily transported from room to room or taken outside for outdoor gatherings. The robust battery life ensures extended playback times, making it suitable for parties, picnics, or simply enjoying a quiet evening at home.

Finally, the aesthetic appeal of the DWPH365 is worth mentioning. With its modern and sleek exterior, it complements any decor style, whether in a contemporary living room or a rustic outdoor setting. The user-friendly interface and intuitive controls further enhance the overall usability of the device.

In summary, the EMI DWPH365 (WHP36-SHC36) is a feature-rich, high-performance wireless speaker that caters to a variety of audio needs. With excellent sound quality, versatile connectivity options, smart features, portability, and attractive design, it stands out as a top choice for both casual listeners and audiophiles alike.