4.To turn On your unit, press the safety switch lock and at the same time slide it up to the desired speed.

0 Power "OFF"

1 Low speed

2 High speed

5.Turn on the unit (￿g. 4) and gently rotate (back and forth or side to side) over the callous/corn/hard skin area for 2-3 seconds. Do not press hard - gently glide the unit over desired area. The unit will stop if it is pressed too hard on the skin. Turn the unit o￿ and check if you achieved the softness you desire. If not, turn on the unit and go over the area for 2-3 seconds more and check again. Continue to use this method until the level of smoothness is obtained.

Warning: Stop using if skin becomes sore or in￿amed.

Warning: Do not use on skin for more than 2-3 seconds at a time.

4

5

6.Turn the unit o￿ (￿g. 5).

7.Rinse the skin or use a wet towel to get rid of the excess dead particles.

8.To clean the Emjoi®Micro-Pedi Pro Tornado, please see the Cleaning section.

9.Keep the protective cover on your unit when it is not in use.

P. 5

Page 6
Image 6
Emjoi AP-3MPR manual Keep the protective cover on your unit when it is not in use