Emotiva manual IPS-1Front Panel Features, 3 2, Power Button, Amplifier Channel Display

IPS-1 Front Panel Features

3

2

1

1 Power Button 3 Amplifier Channel Display

This turns the main power to the IPS-1 on or off. It is a main power button, but it is not required to turn this on and off each time the IPS-1 is used. When enabled, the AUTO ON/OFF MODE will automatically switch the amplifier on when an audio signal comes from a source or control unit (such as a preamplifier). The TRIGGER MODE will turn the amplifier on when an external source (such as a preamplifier) provides a 5-24 VDC input on the trigger terminals.

2Panel Dim Selector Button

This button selects the overall brightness of the lighting on the front panel of the IPS-1. The button has four steps, each con- secutively after the other. The four levels of brightness are:

•High

•Medium

•Low

•OFF

Pressing the PANEL DIM button repeatedly will scroll through each level of bright- ness.

This multi-color LED display behind a tinted acrylic panel shows states of any of the seven power modules on the IPS-1.

BLUE LIGHT: Power Module is on and ready.

AMBER LIGHT (middle row): Power mod- ule is powered on but is in a standby situ- ation waiting for audio signal or external trigger.

RED LIGHT: This indicates a fault condition. A fault condition is one or more of the fol- lowing:

•Excessive Operating Temp

•Excessive Current (Short Circuit)

•DC on the Outputs

See the“Troubleshooting Section”for more details on the display.

Note - When there is NO LIGHT - The power module’s fuse is blown.

Page 10