UPA-2 Technical Specifications
Rated Power Output:
Channels
Frequency Response:
Total Harmonic Distortion (THD):
Channels
Signal-to-Noise Ratio:
DC Offset:
Crosstalk:
Damping Factor:
Input Sensitivity Range (Gain):
Channels
Input Impedance (RCA Input):
External Trigger Input:
External Trigger Output:
Clearance for ventilation (Back):
Electrical Power Requirement:
Electrical Power Consumption:
Raw Weight:
Shipping Weight:
Dimensions:
(All Channels Driven @ 1Khz, 115VAC/ 60HZ supply, THD noted) 125 Watts into 8 Ohms (0.04%THD)
225 Watts into 4 Ohms (0.04%THD)
(80kHz measurement bandwidth) <0.040%
>100dB, Unweighted (Full Output Reference) <1mV
>80dB
Approximately 200 into 8 Ohms
31dB
23.5K Ohm
5~12 VDC, center tip of 3.5mm jack is positive 12VDC, 500mA max
Minimum 2” / 50 mm
350 watts @ 115VAC when driven into 8 Ohms
4 Watts (Standby) and 30 Watts (Idle)
30lbs/ 13.6kg 39lbs /17.7kg
17” W x 3.46” H x 16.7” D 432mm W x 88mm H x 423mm D
Page 20