Wiring
The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA No. 70, if an external electrical source is utilized. This appliance is equipped with a
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dan- gerous operation. Verify proper operation after servicing.
Oiling Blower Motor
The blower motor does not have oiling holes. Do not attempt to oil the blower motor.
WARNING:
Unplugging of blower accessory will not stop the heater from cycling. To turn off gas to the unvented heater: Push in gas control knob slightly and turn clockwise to “OFF.” Do not force.
|
| |
Index | Part |
|
No. | Number | Description |
1 | 11508 | FAN CONTROL BRACKET |
2 | FAN CONTROL | |
3 | 11301 | BLOWER DIVERTER |
4 | CORD SET | |
5 | STRAIN RELIEF BUSHING | |
6 | GASKET | |
7 | BLOWER ASSEMBLY | |
8 | WIRE HARNESS | |
9 | SNAP BUSHING | |
10 | 11507 | BLOWER SHIELD - SIDE |
11 | 11506 | BLOWER SIDE - FRONT |
12 | AUTO/OFF/ON SWITCH |
Page 25 |