8X DDS DVD± R/RW Drive

5.If you have a sound card that can be connected to the drive, you can also connect the drive (as Audio-Out) and the sound card (as Audio- in) with a 4-pin audio cable.

If your motherboard is integrated with built-in sound system, plug the 4-pin audio cable into the CD-IN connector on the motherboard as Audio-in.

6.Connect the USB cable at the back of the drive to the USB header on the computer’s motherboard. The red wire of the cable needs to be plugged into Pin 1 on the board. I

This drive supports USB 2.0 and if you connect to USB 1.1 connector, only transfer rate of USB 1.1 will be available.

IDE

USB

Red Wire

Red Wire

Mother

 

Error-Proof Pin

Board

 

Signal

Pin#

USB Header

Red/Vcc

1 / 6

 

White/D-

2 / 7

 

Green/D+

3 / 8

 

Black/Ground

4 / 9

 

Braided Shield Ground

5

 

Error-Proof Pin

10

 

If the connection is correct, the lower right LED on the front panel will light green.

7.Re-attach the cover of the computer, and reconnect the power cord and all cables to the computer.

5