General Wireless Advance Settings
Items Information
Hide SSID Mark to disable SSID from broadcasting. As default,
this device broadcasts its SSID to allow every
wireless station located within the coverage of this
wireless router to discover this wireless router easily.
Beacon Period The period of time a beacon is broadcasted (default
100ms).
DTIM Period The beacon of a Delivery Traffic Indication Message
is broadcasted (default 1 beacon).
RTS Threshold If the packet size is smaller than the Request To
Send threshold, the wireless router will not send this
packet by using the RTS/CTS mechanism (default
2347 bytes).
Fragment Threshold Specifies the maximum size of packet during the
data transition. A higher value brings a better
performance (default 2346 bytes)
Tx Power Select the Transmission Power of very weak, weak,
medium, and strong according to your demand.
g/b Protection Allows the adapters search for 802.11g/b singles
only. Select “Auto” to turns it on or off automatically,
select “Always On” to support protection or select
“Always Off” to disable this function.
Support WMM To enable/disable Wi-Fi Multimedia function.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
802.11n Wireless advance Settings
Items Information
HT Operation Mode Select the mixed or green field mode as the
Hyper Throughput operation mode.
HT Channel Bandwidth Select the 40MHz or 20MHz as the channel
bandwidth.
HT Guard Interval Select 400ns or 800ns as the interval time.
Enable HT TX Aggregate
MSDU Mark to enable Hyper Throughput TX Aggregate
MAC Service Data Unit, and clear to disable.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
19