ENHWI-G2
46
Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once
the modem has established a link to your ISP, plug the power back into
the router. Wait about 30 seconds and log back into the router.
Step 10 Click on the Status tab in the web configuration where you
can view the device info. Under WAN, click DHCP Release, then click
Back, then click DHCP Renew, and then click Back. You should now
see that the device info will show an IP address, verifying that the
device has connected to a server and has been assigned an IP address.