LAN Interface Setup
To set up the configuration of LAN interface, Private IP of you router LAN
Port and Subnet mask for your LAN segment.
Configuration
25
IP address The IP of your Router LAN port (Default 192.168.1.1)
Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)
DHCP Server
To give your LAN Client an IP, you have to enable
“DHCP Server”. If not, manual setting up your client IP
is necessary when you want to use the router as your
client’s default gateway.
DHCP Client
Range
Specify the DHCP Client IP address range. You can
also click the “Show Client” button to listed those
connected DHCP clients.
802.1d
Spanning tree To prevent from network loops and preserve the
quality of bridged network
Enable UPnP Mark this checkbox to allow this router to be
recognized by uPnP.