Front Panel Power Button
To activate the device, press this Power button for 2 seconds after connecting the
device to an appropriate power outlet with the provided power cord.
To power off, press the button for two seconds until Power LED starts to blink.
LEDs Definition
LED Status
Steady Blue Power on
Blinking Blue System starting\ closing
Power
Off Power off
Steady Green Valid Connection at 1000 Mbps
Blinking Green Data transmitting at 1000 Mbps
Steady Amber Valid Connection at 10/100 Mbps
LAN
Blinking Amber Data transmitting at 10/100 Mbps
Blinking Amber Data transmitting on HDD HDD Off No HDD acting
Blinking Amber Data transmitting or receiving on eSATA port. eSATA Off Invalid connection on eSATA port.
Steady Green Valid connection on USB I port. USB I Off Invalid connection on USBI port.
Steady Green Valid connection on USB II port. USB II Off Invalid connection on USBII port.
Steady Red HDD has run out of space. HDD FULL Off Space available on HDD
Backup Steady Amber Data copying from USB I to internal HD.
Off Data copying finished.
7