ENUTV-DVB-S User’s Guide -
3.3 Transponder Parameters
1. Add transponder
Add a new transponder in the transponder list. The following figure is transponder parameter dialog box.
a) Name:
Enter the new name of the TP. b) [Frequency (MHz)]
This box indicates the down link frequency of the current transponder. c) [Symbol Rate (KS/s)]
This box indicates the symbol rate of the current transponder. d) [Polarity]
This box shows the LNB power supply mode. There are [Vertical], [Horizontal] polarization and [Disable] for your choice.
16
