ENUTV-DVB-S User’s Guide -
3. Available PID
Show searched data PID under the current transponder in the table. (Standard PID)
4. Active PID
This item shows the current active PID.
5. PID (Hex)
Input the PID provided by your service provider.
6. Add PID
Add PID value in [PID] and in Available PID table into active PID table. It can be added to 64 PIDs at the most.
7. Delete PID
Delete the selected PID in the active PID table.
8. Filter Type
Two filter types are available: MAC filter and Dial IP filter.
MAC Filter: Filter data packets per the receiving box’s MAC address. If the destination address in the data packet is as the same as MAC address of the box, the packets will be received. If not, the packets won’t be received.
Dial IP Filter: Filter data packets per the IP address assigned by server.
9. Unicast and Multicast
MAC: To show the MAC address of the receiver box.
Data Rate: To show unicast and multicast data rate in unit time.
NOTE: In any circumstance the broadcast and multicast data will pass it.
18
