Configuration
This is the page where you can change the basic settings of the 802.11g Wireless USB 2.0 Adapter with the minimum amount of effort to implement a secure wireless network environment.
SSID: The SSID differentiates one Wireless LAN group name from another; so all access points and all devices attempting to connect to a specific Wireless LAN group name must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID.
Wireless Mode: If you want to connect with an Access Point/WLAN Router, please set to “Infrastructure” mode. If you have more stations and just want to set them as local network, please set the mode to
Channel: It shows auto that used for Infrastructure Wireless LAN network. The channel number can be set only under the
In Infrastructure mode, the Wireless USB Adapter will automatically detect the channel number of the Access Point.
Power Mode: There are 3 modes to choose:
Continuous Access Mode (default): The USB Dongle is constantly operating with full power and it consumes the most power.
Maximum Power Save: The USB Dongle consumes the least power and only operates when there is wireless network activity.
Power Save: The USB Dongle consumes the moderate level of power.
8
