h Fragment Threshold: Place a check in this box if you would like to
enable Fragment Threshold. Any packet larger than the specified value
(bytes) will be discarded.
h Click on the Apply button to save the changes.
The Security tab allows you to configure the authentication and encryption
settings such as: WEP, WPA-PSK, WPA2-PSK and 802.1x. Each security option
is described in detail below.
WEP Encryption
The WEP tab displays the WEP settings. Encryption is designed to make the
data transmission more secure. You may select 64 or 128-bit WEP (Wired
Equivalent Privacy) key to encrypt data (Default setting is Disable). WEP
encrypts each frame transmitted from the radio using one of the Keys from a
panel. When you use WEP to communicate with the other wireless clients, all the
wireless devices in this network must have the same encryption key or pass
phrase. The following information is included in this tab, as the image depicts
below.
h Authentication Type: Select Open or Shared from the drop-down list.
h Encryption: Select WEP from the drop-down list.
h WEP Key: Type a character string into the field. For 64-bit enter 5
38