Energizer 2103, 2103c, 2103G 25

2103 Modem Module

Section 2 Installation and Operation

2.In the Phone Number list box, type the contact telephone numbers. These must be valid TAP access numbers. You must enter at least one number; you can enter as many as five. When an alarm condition is triggered, the system will try dialing each phone number in the list.

a.To find this number, and the communications parame- ter settings, consult with your pager service, or go to http://www.avtech.com/Support/TAP/index.htm

or to http://www.notepage.net/tap-phone-numbers.htm.

b.With either online location, click the letter correspond- ing with the first letter of the name of your service pro- vider. You will advance to a screen that shows your service provider, the access number, and parameter val- ues (Figure 2-8).

TAP service number and parameter values

Figure 2-8 TAP Service Parameters

3.For each phone number entered, enter a Pager ID, which is the phone number of the cell phone or pager that will receive the text message. (The ID will come from your pager service.)

4.You have the option of entering a password of up to six characters in length.

5.In the Comm field, select 7E1 or 8N1for the communica- tions control specification (your pager service has this information).

6.You must enter a message to be sent to the pager. In the field labeled Message, type the outgoing text message (maximum of 32 characters).

7.Under “Alarm condition”, select the desired alarm parame- ter from the drop-down list, then define the alarm condi- tions.

8.Click the Apply button or press F9 when you are done, to update the module’s settings.

2-9

Contents

Installation and Operation Guide Page Foreword Page Table of Contents Section 1 Introduction Section 2 Installation and Operation Section 3 2103C Cellular Modem Module Section 4 2103G Cellular Modem Module List of Figures List of Tables Page Section 1 Introduction 1.1 Introduction 1.2 Product Description 1.3Identifying Module Components Page Table 1-32103 Modem Module Technical Specifications Table 1-4Specifications – 2191 Battery Module Table 1-52103 Communication Connector Pins (2103 only) 1.4Safety Symbols and Hazard Alerts 1.5 Technical Service Page Section 2 Installation and Operation 2.1Unpacking Instructions 2.2Safety 2.3 Installation Page Page Page Page Page Page Page Page Section 3 2103C Cellular Modem Module 3.1 Overview 3.2 Antenna Options Page Page 3.3Connecting to Flowlink Page Section 4 2103G Cellular Modem Module 4.1 Overview 4.2 SIM Card Page 4.3 Antenna Options Page Page 4.4Connecting to Flowlink 4.5Setting Up The Access Point Name Page Section 5 Modbus Protocol 5.1 Introduction Establishing Module Addressing 5.3 Configurations 5.4 Glossary of Terms 5.5 Common Acronyms Register Specifications Table 5-1Modbus ASCII Address 1 Register Definitions Table 5-2Modbus ASCII Address 2-(N+1)Register Definitions Table 5-2Modbus ASCII Address 2-(N+1)Register Definitions (Continued) Table 5-3Measurement Parameters by Model Number Page Section 6 Maintenance 6.1Maintenance Overview 6.3 Desiccant 6.4 Hydrophobic Filter 6.5 O-Rings How to Obtain Service Page Appendix A Replacement Parts A.1 Replacement Parts Page Page Page Page Page Page Page Page Page Page Page Appendix B Accessories B.1 How to Order B.2 General Accessories Page Appendix C Material Safety Data Sheets C.1 Overview Material Safety Data Sheet Section 1 - Material Identification and Information Section 2 - Physical/Chemical Characteristics Section 3 - Fire and Explosion Hazard Data Section 4 - Reactivity Hazard Data Section 5 - Health Hazard Data Section 6 - Control and Protective Measures Section 7 - Precautions for Safe Handling and Use/Leak Procedures MATERIAL SAFETY DATA SHEET Section 1 – Product and Company Information Section 2 – Composition / Information on Ingredients Section 3 – Hazard Identification Section 4 – First Aid Measures Section 5 – Fire Fighting Measures Section 6 – Accidental Release Measures Section 7 – Handling and Storage Section 8 – Exposure Controls/Personal Protection Section 9 – Physical and Chemical Properties Section 10 – Stability and Reactivity Section 11 – Toxicological Information Section 12 – Ecological Information Section 13 – Disposal Information Section 14 – Transportation Information Section 15 – Regulatory Information Section 16 – Other Information Page Page Standard Description Performance Criteria Severity Applied USA Representative Page Page Page Standard Description Severity Applied William Foster USA Representative Page Teledyne Isco One Year Limited Factory Service Warranty Return Authorization Shipping Address: Mailing address: