Enfora GSM2218, GSM2218PB001MAN 2 Installation , 2.1 Mounting Dimensions

GSM2218PB001MAN - GSM/GPRS MT-GL User Manual Page 4

Instructions provided in this section describe the hardware installation of the MT-GL device. To install

the MT-GL in a vehicle, follow these steps:

• Choose a convenient location in the vehicle – either in the trunk or interior of a vehicle. Avoid

locations that might expose the device to excessive heat or moisture.

• Hold the MT-GL in place and mark the location for mounting screw holes

• Using the markings as a guide, drill mounting holes in those positions

• Align the MT-GL in the drilled holes and secure it with mounting screws

The MT-GL is NOT a waterproof or sealed device. Care must be taken to ensure the device is kept away

from water or any other liquids.

Figure 3 - Mounting dimensions of a MT-GL (Shown with mounting plate)