General Setup

OSD Language (on-screen display language)
Default setting: English
Choose the language you want on-screen information
and menus displayed in.

Aspect Ratio

Default setting: 16:9
Choose the option that matches your display device;
either 4:3, Letterbox or 16:9.

Video Standard

If you have already selected the video signal standard
for your TV using the DISP (display) key on the handset
(see
Video Output
section at the start of this chapter),
skip this item.
Default setting: Native
Choose the option that matches the video signal
standard accepted by your display device. Set to Native
if your display device accepts both NTSC and PAL standards.
Notes:
If Video Standard is set to Native you may notice the screen flicker when a DVD-Video
begins to play. This happens when the UNIDISK SC switches from one video signal
standard to the other.
If your display device only accepts one type of standard and a PAL to NTSC, or NTSC to
PAL conversion is applied, you may notice degradation in the picture quality when
viewing DVD-Videos or DVD-Audios that have been recorded in the other standard.

NTSC Type

For countries that use the NTSC signal standard.
Default setting: North American
If in the U.S.A. or Canada, set to North American.
If not in the U.S.A. or Canada, set to World.

Prim. (Primary) Display Device

Default setting: Interlaced
The UNIDISK SC is able to account for the video delay
inherent in the processing required for progressive video
signals, thus ensuring that both video and audio signals
are output simultaneously. Set this option to suit the
main display device in your AV system.
IIMMPPOORRTTAANNTT NNOOTTEESS -- HHDDMMII
If you wish to use the UNIDISK SC’s HDMI output, your display device must be HDMI or
DVI/HDCP compatible. No picture will be available on a display device that has a DVI
input but is not HDMI or DVI/HDCP compatible.
If the HDMI setting is selected, the UNIDISK SC’s digital audio outputs (SPDIF and
TOSLINK) will provide stereo only – i.e. digital surround sound will be unavailable on
these outputs. Analogue outputs are unaffected.
To restore digital surround sound to these outputs, access HDMI Setup (see page 12) and
set HDMI Audio to OOffff.
Interlaced Out (this item is not availalble

on the Phono version)

Default setting: RGB
Select the video output signal accepted by your display
device. If your display device accepts both RGB and
YPrPb signals, set to YPrPb as it usually provides better
picture quality.
Setup Menus English
UNIDISK SC PLAYER
Owner’s Manual
9
Uni SC ENG part 1 for japan 9/28/05 12:41 PM Page 15