33
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-
progress on hold.
3. Battery talk time and standby time vary depending on the
talk/standby pattern and the operating distance. Returning the
handset back to the charging cradle as often as possible is
recommended for best performance. Use only manufacturer
provided battery and charger!
34
Advanced Operations
Handset Registration
1. If your handset is purchased as part of a system, it has been
pre-registered with the base station at the factory.
2. If the Handset ID reads “00,” that means it is a new handset or
the ID has been erased. You need to register the handset with
the base station. In certain situations, you may want to change
a handset’s ID. For example, you want to change a particular
handset from a user to an administrator (ID 10 or 11), or vice
versa. Or in some rare occasions, you find another handset
having the same Handset ID.
3. Registration:
a. Press MENU-6 to enter the registration mode
b.
Press and hold the base’s Registration (REG) button for 2
seconds until the L1, L2, L3, and L4 LED come on.
c. Press handset key “1”, this completes the registration
process. The base station will assign a handset ID
between 10 and 99. The assigned ID will be displayed on
the handset LCD, indicating successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID 10 and
11, which gives them administrator privileges.
4. De-registration:
a. You can de-register a handset from a base. De-
registration will reset the Handset ID to 00, erase the
system security code, and free up the old ID for future
registration.
b. After deregistration, the handset will not be able to use the
base to make or receive phone calls, nor can it intercom
other handsets.
c.
Press handset MENU (Right) soft key.
d. Press the handset number key “6”, this will enter the
handset registration menu.
e. Press and hold the base’s REG button for 2 seconds until
L1, L2, L3, and L4 LED come on.
f. Press the handset number key “2”, this completes the de-
registration process. Upon successful de-registration, the