11
Handset Illustration Antenna
Receiver
Battery pack
4-line LCD
Travel charger
jack
Headset jack
(2.5mm)
12
Handset Features 1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for
backlighting.
b. The 1st line of LCD consists of icons.
c. Icons explanation from left to right
(1)
RSSI (Receive Signal Strength
Indicator)
During a call, the number of bars is
proportional to the radio signal
strength received.
(2) Call in-progress (ON/OFF-Hook)
Indicates if phone line mode is
active
(3)
Intercom in-progress
Indicates if Intercom mode is active
(4)
Handset ID
Displays a handset icon and a 2-digit Handset ID
(5)
Two-Digit Address Index
Shows address index when viewing contents of the call logs.
(6)
Line Indicator
Indicates the number of the line being accessed by the
handset.
(7)
Battery Strength
z Number of bars is proportional to the amount of battery
time remaining.
z Indicates charging when in charger cradle.
d. The 2nd and 3rd lines of the LCD, maximum 14 characters
each, display status, message, menu selections, or user-
editable alphanumerical characters.
e The last line displays the left and right soft keys.
2. Ringer
a. Rings to an incoming call.
b. Distinctive alert sounds indicating various events:
(1) Single Beep: successful key entry
(2) Double beep: failed operation or invalid key entry, also
indicates power on/off
(3) Periodic 1-Long-2-Short Beep (every 1 minute): low battery
warning