WIRELESS SOLUTION PROVIDER
Antenna Splitter Quick Reference
The EnGenius Antenna Splitter allows the EnGenius base unit's signal to be directed to two different areas. Splitting the signal will significantly reduce the potential coverage, when compared to not splitting the signal, but is ideal when obstacles obstruct the signal and weaken or prevent coverage to another area.
Technical Specifications
Item | Electrical Specifications |
Isolation | > 14dB |
Insertion Loss | < |
MAX Power Input | = 4W |
Installation Procedure
1. Connect the Reverse Thread TNC Connector (Port 3) to the included 3 meter coaxial cable, and then attach the other end of
this cable to the base unit's antenna connector.
Note: EnGenius base unit's antenna connector uses a reverse
thread TNC adapter and is turned clockwise to remove. 2.Connect the Reverse Thread TNC Connector (Port 1 or Port 2) to
the Antenna Kit,
| Port 1 |
| Connected to |
Port 3 | antenna |
| |
Connected to |
|
base unit | Port 2 |
|
Connected to
antenna
