Freestanding Pellet/Corn/Multi-fuel Installation

Caution: Follow the pipe manufacturer’s installation instructions and directions for passing through combustible walls and ceilings. Check local codes in your area.

Illustration 1

Must have

minimum 3”

adapter before tee

for longer run.

For shorter run, tee alone is acceptable.

Our Part AC-33000

is acceptable for through-the-wall installation.

(We recommend 4”

for 2500+ ft.

installations, Our Part AC-33100.)

Basement Installation should be performed by

professional installer. Use 3” metal pipe and coupler for Outside Combustion Air. Minimum 3 ft. (3’) clearance from ground to the Corn Vent Exhaust Pipe.

1.If 3” flue pipe exceeds 15’ in length, increase to 4” flue pipe for remaining flue connections.

2.Total flue length should not exceed 35’.

3.Horizontal run not to exceed 4’.

4.Floor protector required: Min. size 36” x 48”.

5.If the total run of outside air connection exceeds 6’, if more than 2 elbows are used, or if a basement install, use 3” metal pipe (and coupler) instead.

6.Outside Air is mandatory for proper safe operation.

FLOOR AND WALL PROTECTION

Floor Protection

If your floor is constructed of a non-combustible material such as brick or concrete, there is no need for floor protection. If the floor is constructed of a combustible material such as hardwood, linoleum, or carpet, then you will be required to use floor protection between the unit and the combustible. The protection should be U.L. approved or equal, and should be large enough to provide a minimum of six inches (6”) behind and on both sides of the stove. The clearance in front of the stove should be at least six inches (6”). This freestanding pellet unit will need a minimum 36” x 48” floor protector.

Wall Protection

From the rear of this stove only six inches (6”) of clearance is required to paneling, wallpaper or drywall (we recommend more clearance for maintenance access). Six inches (6”) would be required to a sidewall. From the corner of the stove, 4 ½” of clearance is required. Alcoves: The alcove must be a minimum of sixty- six inches (66”) from floor to ceiling. Six inches (6”) of clearance is required from the stove to an alcove sidewall; six inches (6”) is required to an alcove back wall.

The corn vent pipe would require the standard three inches (3”) clearance, or as recommended by the pipe manufacturer. Normally, additional wall protection is not required with this type unit.

12

IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.

ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE

TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.

Page 11 Page 13
Page 12
Image 12
England's Stove Works 10-CPM Freestanding Pellet/Corn/Multi-fuel Installation, Floor and Wall Protection, Floor Protection
Page 11 Page 13

40-TRCPM, 10-CPM, 49-SCHPM specifications

England's Stove Works is renowned for its commitment to crafting high-quality wood stoves and pellet stoves, and three of their notable products are the 49-SCHPM, 10-CPM, and 40-TRCPM models. Each of these stoves embodies the brand's dedication to efficiency, durability, and performance, making them popular choices for both heating homes and providing a cozy ambiance.

The 49-SCHPM is a powerful pellet stove designed to heat large spaces. It features a spacious hopper that can hold up to 60 pounds of pellets, allowing for extended burn times of up to 80 hours on lower settings. The stove incorporates an easy-to-use digital control board and a built-in thermostat, providing users with precise temperature regulation. This model also boasts a sleek, contemporary design, making it suitable for modern homes while still delivering traditional warmth.

In contrast, the 10-CPM is a compact and efficient pellet stove, ideal for smaller homes or tight spaces. Despite its smaller footprint, it still offers impressive heating capabilities with up to 35,000 BTU output, making it a formidable option for anyone seeking an efficient heat source without sacrificing performance. The 10-CPM features a large viewing window, which enhances the aesthetic appeal and allows users to enjoy the mesmerizing flames. It is also equipped with an automatic ignition system, making it convenient and easy to start.

The 40-TRCPM model showcases England's Stove Works' dedication to versatility. This multi-fuel stove can efficiently burn both wood pellets and corn, allowing homeowners the flexibility to choose their fuel source based on availability and cost. With an output capacity of 40,000 BTU, it is built to dominate larger areas while maintaining a steady heat output. The unit features a sophisticated combustion system that maximizes fuel efficiency and minimizes emissions, aligning with environmentally sustainable practices.

All three models utilize advanced engineering and technology to ensure an optimal burning experience. They come equipped with efficient air circulation systems and adjustable airflow to promote complete combustion, which results in less smoke and creosote buildup. This not only enhances safety but also contributes to the longevity of each unit.

Overall, England's Stove Works has established a strong reputation for producing reliable, efficient, and aesthetically pleasing stoves. The 49-SCHPM, 10-CPM, and 40-TRCPM exemplify the brand's commitment to quality and innovation, making them solid choices for anyone looking to enhance their home's heating system.
Top Page Image Contents