SECTION VI: CARE AND MAINTENANCE

A.Catalytic Maintenance

Note – Your unit will have a 3” thick, 25-cell combustor (manufactured by Applied Ceramics), or it will have a 1” thick, “ceramic foam” type combustor (manufactured by Clear Skies). The following instructions apply to both types, unless otherwise specified.

1.To reach the combustor, first take out the flame impingement plate by removing the four (4) 3/8” brass nuts (they take a 9/16” wrench). Once the nuts are removed the plate should drop from the four bolts. This will allow you to see the bottom of your catalytic combustor.

2.For 25-cell Applied Ceramics combustor: If the combustor is plugged up you will see black soot within the cells on the bottom side of the ceramic piece. This can usually be removed by brushing the combustor with a soft bristled brush. You can also run a pipe stem cleaner through each cell for removal of any internal build-up. This type cleaning can be done without removing the combustor from the stove.

3.For 1” thick Clear Skies combustor: Follow the instructions provided by Clear Skies pertaining to the cleaning of their combustor.

4.The flame impingement plate (Part #IP-18PC) is held in the unit as described previously. This can be cleaned with a stiff bristled brush.

5.The combustor collar (Part #CA-1710) is also held in place by four (4) 3/8” brass nuts (they take a 9/16” wrench). The flame impingement plate must be removed before the combustor collar. Once the second set of nuts is removed the collar will come out with the catalytic combustor seated in it. Reverse this procedure to replace the collar and flame impingement plate.

6.The catalytic combustor (Part #AC-6C3) is guaranteed by the manufacturers. A separate warranty card will be in the manual for this part and should be mailed back to the combustor manufacturer. Both combustors are equivalent, and in the event there is a problem with this item, Customer Service should be contacted at

1-800-245-6489.

B.Gaskets

Each unit comes with a gasket around the door, which should be replaced every two years. To replace the door gasket (Part # AC-DGKC), the old gasket should first be removed entirely. This may require you to scrape the old gasket and cement from the channel before adding new cement and 3/4” rope gasket. After attaching the new gasket, close the door and allow 24 hours for the cement to harden.

If you are replacing the window gasket (Part #AC-GGK), the gasket already has adhesive on one side. Remove the paper on the adhesive side and place the gasket around the outside edge of the glass. The easiest way to do this is to form a “U” with the gasket and place this around the outer perimeter of the glass.

The door gasket as well as the window gasket can be ordered from your local dealer or from our factory.

Page 10 Page 12
Page 11
Image 11
England's Stove Works 18-MH, 50-TRW15, 50-SHW15 Section VI Care and Maintenance, Catalytic Maintenance, Gaskets
Page 10 Page 12

18-MH, 50-SHW15, 50-TRW15 specifications

England's Stove Works is renowned for its innovative and efficient home heating solutions, and their 18-MH, 50-SHW15, and 50-TRW15 models showcase the brand's commitment to quality and performance. These stoves are designed to provide reliable heating while being environmentally conscious and user-friendly.

The England's Stove Works 18-MH is a multifunctional heating appliance that can burn both wood and biomass. It features a sturdy construction, made from high-quality steel, which enhances durability and efficiency. One of its standout features is the patented automatic air control system, allowing for an optimal burn with minimal emissions. The 18-MH is capable of producing an impressive heat output, making it suitable for larger spaces or homes. The large firebox allows for extended burn times, reducing the need for frequent reloads, ensuring you stay warm longer.

On the other hand, the 50-SHW15 model specializes in burning wood and boasts a fully catalytic design, which helps to lower emissions and improve efficiency. This model includes a large ash pan for easy cleanup and a glass door that allows users to enjoy the beauty of the flames. Its compact size does not compromise its heat output, as it can rapidly warm up an area of considerable size, making it ideal for living rooms or open spaces. The 50-SHW15 also features a secondary combustion system that maximizes heat output and minimizes smoke emissions, making it an environmentally friendly option.

The 50-TRW15 model takes a different approach by focusing on pellet fuel. This stove incorporates advanced technology that ensures a consistent burn rate and high energy efficiency. The automatic ignition system allows for easy startup, while the digital control panel gives users complete control over heat output. This model is designed to be user-friendly, allowing non-technical individuals to operate it comfortably. It also features a large pellet hopper, enabling longer burn times without frequent refueling.

All three models are designed with safety in mind, incorporating features such as cool-to-the-touch handles, protective screens, and robust construction to withstand high temperatures. With their combination of efficiency, safety, and ease of use, England's Stove Works 18-MH, 50-SHW15, and 50-TRW15 models exemplify the perfect balance of traditional craftsmanship and modern technology, making them an attractive choice for anyone looking to enhance their home heating options. Whether you prefer wood, biomass, or pellets, these stoves provide a reliable and environmentally-friendly solution for comfortable heating throughout the winter months.
Top Page Image Contents