Control Board

The Control Board (Part #PU-CB04) is a digital read-out board. This board offers a wide variety of settings to operate the unit. This part can be removed from the unit by loosening the two outside screws and pulling the board back to the inside of the stove. The rear access panel should be removed prior to removing the control board. A 5-amp “quick-blow” fuse is used on this Control Board.

NOTE: The bottom three control buttons are preset at the factory and should not require any changes. See “Operating Instructions” and “Daily Operation” section of the manual for instructions on other Control Board settings.

 

 

 

Recommended Heat Ranges:

 

Low Burn:

Heat Range setting:

1

 

Room Air Blower setting:

1

Medium Low:

Heat Range setting: 2

– 3

Room Air Blower setting: *

Medium High:

Heat Range setting:

5

– 8

Room Air Blower setting: *

High Burn:

Heat Range setting:

9

 

Room Air Blower setting:

9

* NOTE: Blower Speed will automatically be adjusted to the desired Heat Range that you select.

CAUTION:

NOTE: The bottom 3 buttons are pre-set at the factory and do not need adjustment. Call Service at

(800)245-6489 if you have questions or problems.

Illustration 2a

Control Board

Diagram

Page 15
Image 15
England's Stove Works 55-TRP22E, 55-SHP22E, 25-PDVE operation manual Control Board, Recommended Heat Ranges